ESGT-ICG - Sciencesconf.org

8:30 - 9:15 (45min)

Heike Ebendorff-Heidepriem

Soft glasses: a powerful platform for the exploration of new concepts and applications

9:15 - 9:30 (15min)

Break

9:30 - 10:30 (1h)

1 - Basic Glass Sciences - Structure and Properties

Auditorium Lumiere

Thierry DESCHAMPS

› Structure of alkaline-earth aluminosilicates and aluminoborosilicates: insights from neutron, X-ray diffraction and MD simulations - Gustavo Rosales-Sosa, Fundamental Technology Division, Nippon Electric Glass Co., Ltd., Shiga 09:30-10:00 (30min)

› Chemical Strengthening, Mechanical Properties, and Structural Analysis of SiO₂-B₂O₃-Al₂O₃-Na₂O Glass System for Enhanced Bending Resistance - Jin Wook JANG, Div. of Advanced Materials Eng., Kongju National University 10:00-10:15 (15min)

› A new nanometre resolution method for probing densification ratio at nanoindentation sites in glass: Unravelling discrepancies in the literature - jean-pierre Guin, Institut de Physique de Rennes 10:15-10:30 (15min)

9:30 - 10:30 (1h)

2 - Glass transition, relaxation, dynamics

Saint Clair 4

Damien VANDEMBOURCQ

› Memory and recovery effects in the strain hardening regime of glassy polymers : comparison between theory and experiments - Didier Long, Institut National des Sciences Appliquées de Lyon 10:00-10:15 (15min)

› Simultaneous memory effects in the stress and in the dielectric susceptibility of a stretched polymer glass - Caroline Crauste-Thibierge, Laboratoire de Physique de l'ENS Lyon 10:15-10:30 (15min)

9:30 - 10:30 (1h)

4 - Glass surface and coating

Salon Roseraie 1&2

Hervé MONTIGAUD, Nick SMITH

› Network Polymerization, Aluminum Coordination, and the Shifting Mechanisms of Glass Dissolution - Ashutosh Goel, Rutgers, The State University of New Jersey [New Brunswick] 09:30-10:00 (30min)

› Diffusion coefficients of H and Na in aluminosilicate and soda-lime silicate glasses - Tomomi Sekine, AGC Inc. 10:00-10:15 (15min)

› The Formation and Characterization of Gel Layers on Modified Aluminoborate Glasses during Aqueous Corrosion - Sly Jessica, The Pennsylvania State University, Department of Materials Science and Engineering - John Mauro, The Pennsylvania State University, Department of Materials Science and Engineering 10:15-10:30 (15min)

9:30 - 10:30 (1h)

7 - Simulation, modeling, machine learning

Saint Clair 3

Alfonse PEDONE

› Surface Alteration of Silicate Glasses via Atomistic Modeling - Simona Ispas, Laboratoire Charles Coulomb 09:30-10:00 (30min)

› Next Generation Glass with Glass Futures: Building a Digital Furnace - Daniel Backhouse, Glass Futures - Jim Scotson, Glass Futures 10:00-10:15 (15min)

› AI-Driven Optimization of Glass Production: Overcoming Industry Challenges with Celfos - Christian Rabiger, CelSian 10:15-10:30 (15min)

9:30 - 10:30 (1h)

9 - Advance manufacturing processes

Saint Clair 1

Richard POKORNY

› Fabrication of large-sized hybrid glasses: progress, challenges and opportunities - Yuanzheng Yue, Department of Chemistry and Bioscience, Aalborg University 09:30-10:00 (30min)

› High-throughput glass synthesis by 3D-printing - Igor Seibel-Geraschenko, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Germany 10:00-10:15 (15min)

› The Pixel - Nefeli Chatzimina, architectScripta 10:15-10:30 (15min)

9:30 - 10:30 (1h)

10 - Glass and Humanity: history, archaeometry and education

Saint Clair 2

Ana Candida RODRIGUES, Ana CADENA-IRIZAR

› Glass Professions and Knowledge Transmission: Between Pedagogy, Technique, and Technology - Antoine MEXMAIN, Lycée Jean Monnet 09:30-10:00 (30min)

› Education in Glass Art and Science – challenges of transdisciplinarity - 10:00-10:15 (15min)

› ICG Montpellier Summer School – History, Concept, Outcomes - Reinhard Conradt, uniglass AC 10:15-10:30 (15min)

10:30 - 11:00 (30min)

Coffee break (Poster - Exhibition)

11:00 - 12:45 (1h45)

1 - Basic Glass Sciences - Structure and Properties

Auditorium Lumiere

Tetsuji YANO

› Direct connection between secondary relaxation mode and fracture toughness in alkali-aluminosilicate glasses - Marco Holzer, Bundesanstalt für Materialforschung und -prüfung (BAM) 11:00-11:15 (15min)

› Effect of alkaline-earth ions on shear localization and crack resistance under indentation tests in aluminoborosilicate glasses - Yoshinari Kato, Fundamental Technology Division, Nippon Electric Glass Co., Ltd., Shiga 11:15-11:30 (15min)

› Composition and structural impact on thermal and mechanical properties of Mg-Al-Si-O-N Glasses - Theany To, GeM 11:30-11:45 (15min)

› Enhancement of Fracture Toughness in Glasses by Ag Incorporation via Ion Exchange Process - Kenji Shinozaki, National Institute of Advanced Industrial Science and Technology 11:45-12:00 (15min)

› A constitutive model for e-beam induced viscous flow in silicate glasses at room temperature - Guillaume Kermouche, Laboratoire Georges Friedel 12:00-12:15 (15min)

› Fracture toughness of calcium aluminosilicate glasses - Sidsel Mulvad Johansen, Department of Chemistry and Bioscience, Aalborg University 12:15-12:30 (15min)

› Glasses of R₂O-B₂O₃-Al₂O₃ systems: study of structure-mechanical properties relationships at the metaluminous joint (R = Li, Na, K). - Nathan KAIL, 4MAT, Université Libre de Bruxelles, 50 Avenue F.D. Roosevelt (CP 165/63), 1050, Bruxelles 12:30-12:45 (15min)

11:00 - 12:45 (1h45)

2 - Glass transition, relaxation, dynamics

Saint Clair 4

Laurent CHAZEAU

› On the nature of the glass transition in metallic glasses studied via fast scanning calorimetry - Prof. Dr. Isabella Gallino, Technical University of Berlin / Technische Universität Berlin 11:00-11:30 (30min)

› Oxidation state-induced glass-forming ability of melts with high vanadium content - Stefanie Meyer, Institute of Non-Metallic Materials, Clausthal University of Technology 11:30-11:45 (15min)

› Quenching Rate and Composition Combined Effect on Structural Properties and Microstructure in Magnesium Aluminosilicates - Pierre-Emmanuel BES de BERC, Institut de minéralogie, de physique des matériaux et de cosmochimie, Owens Corning 11:45-12:00 (15min)

› Permanent structural modifications of silica glass after laser shock for different impulsion regime - Rémi Sevestre, Institut de Physique de Rennes 12:00-12:15 (15min)

› Solid-State Vitrification of Li and Al Phosphates Through High Energy Mechanical Milling - José Schneider, Instituto de Física de São Carlos, Universidade de São Paulo 12:15-12:30 (15min)

› Probing glassy dynamics and local elasticity in dense colloidal suspensions: insights from single-particle experiments - Piotr Habdas, Department of Physics, Saint Joseph's University 12:30-12:45 (15min)

11:00 - 12:45 (1h45)

4 - Glass surface and coating

Salon Roseraie 1&2

Hervé MONTIGAUD, Nick SMITH

› The effectiveness of Liquid treatment for the Dealkalization of pharmaceutical glass containers - Giuseppe Legrottaglie, Department of Physics [Parma], Istituto dei Materiali per l'Elettronica ed il Magnetismo | IMEM-CNR 11:00-11:15 (15min)

› Impact of complex irradiation scenarios on the structure and the properties of the SON68 glass - Mélanie Taron, Laboratoire des Matériaux et Procédés actifs, Institut de Chimie Séparative de Marcoule 11:15-11:30 (15min)

› Decoding glass durability: new insights into the role of composition - Stéphane Gin, CEA MARCOULE - Valrho, Laboratoire d'étude du comportement des matériaux en environnement complexe 11:30-11:45 (15min)

› Design of chemical etch processes for multicomponent commercial glasses - Stone-Weiss Nicholas, Corning Incorporated 11:45-12:00 (15min)

› Multiscale modeling of heterogeneous etching - Drew Antony, Corning 12:00-12:15 (15min)

› Three-Dimensional Structural Characterization of Hierarchical Nanoporous Layers Formed by Corrosion - Takuya Fujima, Tokyo City University 12:15-12:30 (15min)

› Texturing glass surfaces for enhancing tactile experience - Huseyin Kaya, Corning Incorporated 12:30-12:45 (15min)

11:00 - 12:45 (1h45)

7 - Simulation, modeling, machine learning

Saint Clair 3

Daniel CASSAR

› How AI Transforms Visual Inspection in Glass Bottle Manufacturing - Majd RAHMANI, IRIS Inspection Machines 11:00-11:15 (15min)

› Modelling and Simulation to Address Unique Industrial Challenges and Unconventional Applications of Glass - Owen McGann, Glass Technology Services 11:15-11:30 (15min)

› Thermodynamic database development for novel agentic workflows designed for glass synthesis and application modelling - Alexander Walnsch, GTT-Technologies 11:30-11:45 (15min)

› Advanced Modelling for Regenerator Design Optimization: Driving Energy Efficiency in Glassmaking - Frédéric POMAR, SEFPRO - Mohamed Lazrak, SEFPRO 11:45-12:00 (15min)

› Atomistic simulations of glasses made FAIR - Achraf Atila, BAM Bundesanstalt für Materialforschung u. -prüfung 12:00-12:15 (15min)

› Designing High Young's Modulus Soda-Lime-Silica Glass with Reinforcement Learning and Genetic Algorithm - Zihao Wang, Wuhan University of Technology 12:15-12:30 (15min)

› Refractory corrosion – a problem that could be predicted? - Miroslav Polak, Glass Service, a.s. 12:30-12:45 (15min)

11:00 - 12:45 (1h45)

9 - Advance manufacturing processes

Saint Clair 1

Richard POKORNY, Terutaka MAEHARA

› Fabrication of an alumina gradient doped silica fiber via additive manufacturing - Josef Slowik, Otto-Schott-Institute for Material Research, Friedrich-Schiller-University Jena 11:00-11:15 (15min)

› Optimization of full cavity NiCr coating by cold spray on cast iron glass molds for glass industry - Oumaima AROUBI, CHPOLANSKY, IRLM 11:15-11:30 (15min)

› Highly porous 3D-printed 70S30C bioglass scaffolds from engineered silicone-based emulsions - Valeria Diamanti, Department of Industrial Engineering, University of Padova, Padova, Italy. 11:30-11:45 (15min)

› Improving wetting behaviour of copper on glass for multi material 3D printing - Magdalena Milek, Institute of Glass Science and Technology, Technische Universität Bergakademie Freiberg 11:45-12:00 (15min)

› Microstructural analysis of ultra-short pulse laser welded glass-metal joints - Lukas Günther, SCHOTT AG, Friedrich-Alexander Universität Erlangen-Nürnberg 12:00-12:15 (15min)

› Laser irradiation to alkali ion conducting glass for all-solid-state battery - Tsuyoshi Honma, Nagaoka University of Technology 12:15-12:30 (15min)

› Binary aluminate transparent ceramics and glass microspheres formation from plasma melting - Jihong Zhang, State Key Laboratory of Advanced Glass Materials, Wuhan University of Technology, 122 Luoshi Road, Hongshan, Wuhan, Hubei, 430070, P. R. China, Hepu Research Center for Silicate Materials Industry Technology, 27 Huanzhu Avenue, Hepu county, Beihai, 536100, P. R. China 12:30-12:45 (15min)

11:00 - 12:45 (1h45)

10 - Glass and Humanity: history, archaeometry and education

Saint Clair 2

Francesca COLANGELI, Elise LANGAGNE

› The Royal Glass Factory of La Granja: From the recipes to the pieces - Teresa Palomar, Instituto de Cerámica y Vidrio 11:00-11:30 (30min)

› Photoluminescence-Based Identification of Roman Colorless Glass groups in Reims - Alexandre Hequet, Laboratoire des Solides Irradiés 11:30-11:45 (15min)

› Coloured glass and mosaics in the medieval world - Nadine Schibille, Institut de Recherches sur les Archéomatériaux 11:45-12:00 (15min)

› From Chemical Clusters to Provenance: Islamic Glass in al-Andalus - Ana Cadena-Irizar, Research Unit VICARTE – Glass and Ceramics for the Arts, Faculty of Science and Technology, NOVA University of Lisbon, IRAMAT-CEB, CNRS, University of Orléans - Márcia Vilarigues, Research Unit VICARTE – Glass and Ceramics for the Arts, Faculty of Science and Technology, NOVA University of Lisbon - Nadine Schibille, IRAMAT-CEB, CNRS, University of Orléans 12:00-12:15 (15min)

› Identification of coloring agents of 19th and 20th century African glass beads using XRF and XAS spectroscopy - Laurent Tranchant, Institut photonique d'analyse non-destructive européen des matériaux anciens 12:30-12:45 (15min)

12:45 - 14:00 (1h15)

Lunch

14:00 - 15:30 (1h30)

1 - Basic Glass Sciences - Structure and Properties

Auditorium Lumiere

Nadège OLLIER

› A convincing demonstration of indenter tip geometry imperfection as the cause of the reported indentation size effect in glass - jean-pierre Guin, Institut de Physique de Rennes 14:00-14:15 (15min)

› Revisiting the rate-dependent hardness of glass - Satoshi Yoshida, Materials Integration Laboratories, AGC Inc 14:15-14:30 (15min)

› Alkaline earth – borate systems : thermodynamic modeling & key experiments - Alexander PISCH, Science et Ingénierie des Matériaux et Procédés 14:30-14:45 (15min)

› Semi-empirical modelling of Young's Modulus in aluminoborosilicate glasses from Network Chemistry and Topology - Gabin Haryouli, Laboratoire de Planétologie et Géosciences [UMR_C 6112], Nantes Université, CNRS, Institut des Matériaux de Nantes Jean Rouxel, IMN, F-44000 Nantes, France 14:45-15:00 (15min)

› Interfacial tension and thickness in phase separation of RmOn-SiO2 systems - Franck Pigeonneau, Centre de Mise en Forme des Matériaux 15:00-15:15 (15min)

› Influence of Phase Separation on Stress Corrosion Cracking in SiO₂–B₂O₃–Na₂O Glasses - Cindy Rountree, Service de physique de l'état condensé 15:15-15:30 (15min)

14:00 - 15:30 (1h30)

4 - Glass surface and coating

Salon Roseraie 1&2

Peggy GEORGES, Stéphane GIN

› Glass surface and etching considerations for use in advanced semiconductor packaging - Nicholas Smith, Corning Research & Development Corporation 14:00-14:30 (30min)

› Water-Based Organosilane Coatings for Low-Friction and Scratch-Resistant Pharmaceutical Glass Vials: From Dipping to Automated Spray Deposition - Tiziana Pastore, IMEM-CNR Institute, Parma 14:30-14:45 (15min)

› Factors Governing Staining of Float Glass Exposed to an Acid Cleaning Product - Ricardo Lancelotti, Federal University of São Carlos = Universidade Federal de São Carlos 14:45-15:00 (15min)

› Development of low-carbon glass frits for glass enameling applications - Loïc Robert, Saint Gobain Research Compiègne, Université de Rennes 15:00-15:15 (15min)

14:00 - 15:30 (1h30)

7 - Simulation, modeling, machine learning

Saint Clair 3

Alfonso PEDONE

› Molecular Dynamics Simulations of Sodium Borosilicate Glasses to Open Access Datasets - Cindy Rountree, Service de physique de l'état condensé 14:00-14:15 (15min)

› Atomic scale inspired model for shear banding in silicate glasses - Gergely Molnar, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] 14:15-14:30 (15min)

› Amorphous-Amorphous Transitions in Compressed Glasses - Bernard Hehlen, Laboratoire Charles Coulomb 14:30-14:45 (15min)

› Nanostructuration of sillicate glasses using water: a multiscale simulation investigation - Khalis Attou, Institut de Physique de Rennes 14:45-15:00 (15min)

› Symmetry Transitions Beyond the Nanoscale in Pressurized Silica Glass - Zhen ZHANG, Chengdu University of Technology 15:00-15:15 (15min)

14:00 - 15:30 (1h30)

8 - Glass: a sustainable material – Sustainability and environment

Saint Clair 4

Sophie SCHULLER, Ashutosh GOEL

› Research and development of nuclear waste vitrification in China - Kai Xu, Wuhan University of Technology 14:00-14:30 (30min)

› In-situ Vitrification of Contaminated Soils Using Geomelt® ISV™ Process: Characterization of vitrified materials - Loryelle SESSEGOLO, DES/ISEC/DPME/SEME/LEMC 14:30-14:45 (15min)

› A comparative study on immobilization of ERV2 chloride salt simulant in ceramics, glass and glass-ceramic waste forms - Anirban Chakrabarti, Wuhan University of Technology 14:45-15:00 (15min)

› Partially crystallized glass melts: impact of crystallization on rheology - Théo Pitarch, Laboratoire de Formulation et de Caractérisation des Matériaux minéraux 15:00-15:15 (15min)

› Reduced uranium solubility in alkali borate matrix: a synchrotron x-ray investigation - Myrtille Hunault, Synchrotron SOLEIL 15:15-15:30 (15min)

14:00 - 15:30 (1h30)

9 - Advance manufacturing processes

Saint Clair 1

Terutaka MAEHARA

› Room-Temperature Bonding of Ultrathin Freestanding Glass Films for Optical and Biomedical Applications - Tetsuo Kishi, Institute of Science Tokyo 14:00-14:30 (30min)

› Additive manufacturing of open porous glass foams using vat photopolymerization - Martin Østergaard, Department of Chemistry and Bioscience, Aalborg University 14:30-14:45 (15min)

› Oxidation resistance and thermal performance of copper-based coatings on cast iron for glass manufacturing moulds - Timothée LAURIDANT, Chpolansky 14:45-15:00 (15min)

› Glass as a binder material for additive manufacturing by Powder Bed Fusion - Lilia SENNOUN, Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181 – UCCS – Unité de Catalyse et Chimie du Solide 15:00-15:15 (15min)

› The secret face of hidden displays - Isabelle MELSCOET, Faurecia Clarion Electronics 15:15-15:30 (15min)

14:00 - 15:30 (1h30)

10 - Glass and Humanity: history, archaeometry and education

Saint Clair 2

Mathieu HUBERT, Théo CAROFF

› Drying the tears of ‘weeping‘ glass - Gerhard Eggert, Stuttgart State Academy of Art and Design 14:30-14:45 (15min)

› The bicentennial of the Verrerie de Saint-Just: history and innovation in the art of mouth-blown glass. - Aurélie Kostka, Verrerie de Saint-Just 14:45-15:00 (15min)

› The glassworks of Portieux and the Atelier des Arts de Portieux (1982-1986). A creative utopia serving industrial renaissance. - Christophe Bardin, Cierec, Université Jean Monnet, Saint-Etienne 15:00-15:15 (15min)

15:30 - 16:00 (30min)

Coffee break (Poster - Exhibition)

16:00 - 18:15 (2h15)

1 - Basic Glass Sciences - Structure and Properties

Auditorium Lumiere

Doris MONCKE

› Combined X-ray Raman Scattering, X-ray Emission Spectroscopy, and Optical Raman Spectroscopy for in situ Studies of Glasses and Melts under Extreme Conditions - Leonie Tipp, Technische Universität Bergakademie Freiberg 16:00-16:15 (15min)

› Probing Densification Mechanisms in Indented Silica Using Brillouin Spectroscopy - Alice BERTHELOT, Institut Lumière Matière [Villeurbanne] 16:15-16:30 (15min)

› Glass formulation of CaO/SrO-La2O3-Al2O3-ZrO2 system using In-Flight Melting Method - Tetsuji Yano, Institute of Science Tokyo 16:30-16:45 (15min)

› Structural study of nanoparticles under pressure: toward a new amorphous phase - Tony Faceira, Institut Lumière Matière 16:45-17:00 (15min)

› Impact of boron on high temperature multicomponent diffusion in alumino-soda-lime silicates. - Ekaterina Burov, Surface du verre et interface 17:00-17:15 (15min)

› Effect of MgO Content on the Dissolution Behavior of Soda Lime Silicate (SLS) Glasses in Alkaline Conditions - Bahar Kuzu, Sisecam Science, Technology and Design Center 17:15-17:30 (15min)

› Enhancing Niobate Solubility in Aluminosilicate Glasses through Network Former Addition - Vera Kerling, Friedrich-Alexander-University Erlangen-Nuremberg (FAU), Department of Materials Science and Engineering, Lehrstuhl für Glas und Keramik 17:30-17:45 (15min)

› Effect of irradiation and thermal treatment on the stored energy, physical properties and structure of ISG glass - Morgane Richet, Laboratoire des Matériaux et Procédés Actifs 17:45-18:00 (15min)

› Influence of doping on the properties of fused quartz glass - Gabriela Kazimiera Warden, Norwegian University of Science and Technology 18:00-18:15 (15min)

16:00 - 18:15 (2h15)

3 - Optical properties and photonic

Saint Clair 1

Anna LUKOWIAK

› Disclosing mechanism of the effect of short-range and medium-range structures on spectroscopic properties of active ions in silica-based glasses - Lili Hu, Shanghai Institute of Optics and Fine Mechanics, CAS 16:00-16:30 (30min)

› Development of Radiation Hard Optical and Photonic Glasses - Owen McGann, Glass Technology Services Ltd. 16:30-16:45 (15min)

› Chiral optical properties induced by elliptically polarized beam in silica via Femtosecond laser writing - Matthieu Lancry, Université Paris-Saclay - Bertrand Poumellec, Université Paris-Saclay 16:45-17:00 (15min)

› Thermo‑electrical polarization of an ionic silicate glass surface assisted by plasma: properties and application to liquid‑crystals molecular alignment - Alexis Maillard, Institut des Sciences Moléculaires, Centre d'optique, photonique et laser, Université Laval, Québec 17:00-17:15 (15min)

› Fs-laser induced nanostructures for high temperature optical sensing – challenging the limits of glass - Maxime Cavillon, Institut de Chimie Moléculaire et des Matériaux d'Orsay 17:15-17:30 (15min)

› Real Time Radiation Induced Attenuation of Commercial Flat FD-7 RPL Irradiated with 2.5 MeV Electron Beam at High Doses - Aditya Raj, Laboratoire Hubert Curien 17:30-17:45 (15min)

› Femtosecond laser writing of birefringent optical modifications in nanoporous glass versus fused silica - Nadezhda Shchedrina, Institut de Chimie Moléculaire et des Matériaux d'Orsay 17:45-18:00 (15min)

› Multi-material optical components for infrared - Mathis Metais, Université Bourgogne Europe, CNRS, Laboratoire Interdisciplinaire Carnot de Bourgogne ICB UMR 6303 18:00-18:15 (15min)

16:00 - 18:15 (2h15)

4 - Glass surface and coating

Salon Roseraie 1&2

Alex MARTUCCI, Tuncay TURUTOGLU

› In-situ observation of macrodeformation of sheet glass induced by ion exchange - Yong Gyu Choi, Korea Aerospace University 16:00-16:30 (30min)

› Impact of Ion Exchange (IOX) alteration layer properties on glass surface contact electrification - Gabriel Agnello, Corning Incorporated 16:30-16:45 (15min)

› Experimental Investigation of Combined Chemical Strengthening and Flame Treatment for Post-Processing of Soda Lime Glass - Frank Bayer, University of Bayreuth, Keylab Glass Technology 16:45-17:00 (15min)

› Chemical replacement zones in ion exchange - from concentration depth profiles to hardness - Karl-Michael Weitzel, Philipps Universität Marburg, Fachbereich Chemie, University of Ulm 17:00-17:15 (15min)

› Invisible Damage on Glass Surfaces: Assessment of Surface/Subsurface Modification and Durability - Joy Banerjee, Corning Incorporated 17:15-17:30 (15min)

› Effect of environment temperature on mechanochemical wear of soda lime silicate glass surface - Li Xiaosong, Southwest University of Science and Technology 17:30-17:45 (15min)

› Effect of electrolyte cations mechanochemical wear of soda lime silicate glass in aqueous solution - Hu Zixian, Southwest University of Science and Technology 17:45-18:00 (15min)

› Non-Bridging Oxygen in Leached and Electron-Irradiated Barium Glass - Ondrej Gedeon, Petr Jiříček, Klára Beranová, Adéla Polonská, Petra Kšírová 18:00-18:15 (15min)

16:00 - 18:15 (2h15)

5 - From glass to crystal

Saint Clair 3

Edgar ZANOTTO

› Silicate glass-ceramics toward photonic application: From precursor design to fiber-type device - YOSHIHIRO TAKAHASHI, Department of Applied Physics, Graduate School of Engineering, Tohoku University, Okamoto Glass Co.,Ltd, 16:00-16:30 (30min)

› Optical fiber thermometers based on Yb/Er codoped oxyfluoride glass-ceramics - María Jesús Pascual, Instituto de Cerámica y Vidrio (ICV-CSIC), 28049, Madrid 16:30-16:45 (15min)

› MgO-Al2O3-SiO2 glass ceramics with superior mechanical performance – Synthesis without the addition of nucleating agents - Katrin Thieme, Fraunhofer Institute for Microstructure of Materials and Systems 17:00-17:15 (15min)

› Crystal Growth and Melting Observed by High-Temperature Optical Microscopy – Evolution of Crystal Morphology and Thermodynamic Modeling - Dr. Lucas Ueberricke, NIPPON ELECTRIC GLASS CO., LTD. 17:15-17:30 (15min)

› An effective shape factor of glass particles from the heterogeneous crystallization kinetics characterized by DSC - Eduardo Bellini Ferreira, Department of Materials Engineering, São Carlos School of Engineering, University of São Paulo – USP 17:30-17:45 (15min)

› Characterizations and optical properties of new highly transparent glass-ceramics elaborated in the TeO2-La2O3-In2O3 ternary system - Jean-René DUCLERE, Institut de Recherche sur les CERamiques 17:45-18:00 (15min)

16:00 - 18:15 (2h15)

8 - Glass: a sustainable material – Sustainability and environment

Saint Clair 4

Sophie SCHULLER, Ashutosh GOEL

› Halides in glasses and melts – connecting immobilization, nuclear fuels, and optics - John Stuart McCloy, Washington State University 16:00-16:30 (30min)

› TANGRAM initiative : Toward an integrative Approach of Nuclear Glass alteration in a Reactive environment from MultiscAle Modelling - Sylvain Peuget, CEA, DES, ISEC, DPME, Université de Montpellier, Marcoule, France 16:30-16:45 (15min)

› A multi parameter approach for predicting initial dissolution rate of silicate glasses - Stéphane Gin, CEA MARCOULE, Université de Montpellier, DPME/SEME/LEMC 16:45-17:00 (15min)

› Initial alteration rate of glasses irradiated with various particles beams - Hélène Aréna, Laboratoire des Matériaux et Procédés Actifs 17:00-17:15 (15min)

› The role of bismuth on the incorporation of iodine in aluminoborosilicate glasses synthesized under high-pressure: An XPS and XAS study. - Yann Morizet, Laboratoire de Planétologie et Géodynamique, Institut des Matériaux de Nantes Jean Rouxel 17:15-17:30 (15min)

› Mild alkali activation of glass for sustainable and recyclable 'unfired' construction materials - Enrico Bernardo, University of Padova, Dept. of Industrial Engineering 17:30-17:45 (15min)

16:00 - 18:15 (2h15)

10 - Glass and Humanity: history, archaeometry and education

Saint Clair 2

Nadine SCHIBILLE, Cécile BRETONNET

› Fourteenth- and fifteenth-century stained glass in Barcelona: Cathedral; Reial Monestir de Santa Maria de Pedralbes; and Santa Maria del Mar. - Jordi Bonet, J.M.Bonet vitralls S.L. 16:00-16:15 (15min)

› Stained glasses : from color to history - laurence Galoisy, IMPMC 16:15-16:30 (15min)

› Archaeometric study of medieval glass coming a lost stained glass window from San Giacomo Maggiore church, Bologna (Italy) - Domingo Gimeno-Torrente, Universitat de Barcelona 16:30-16:45 (15min)

› Ashes to Art: The Glassmaking Traditions of Königsfelden's Medieval Windows - Elise Langagne, Propriétés des amorphes, liquides et minéraux [IMPMC], Institut de Physique du Globe de Paris, IRAMAT - Centre Ernest Babelon 16:45-17:00 (15min)

› Chemical study of two coats of arms stained glass windows in the Chapel of St. Pietro Martire (early 15th century) of the Basilica of San Petronio, Bologna, Italy - Domingo Gimeno-Torrente, Universitat de Barcelona 17:00-17:15 (15min)

› Studying the old to create the new: the example of the stained glass windows of Saint-Etienne-Du-Mont (17th century). - Théo Caroff, Manufacture Vincent Petit, Propriétés des amorphes, liquides et minéraux [IMPMC], LabCom Luminano - Lumière - Nano-Optique – Vitrail 17:15-17:30 (15min)

Program